Tower Ride Manufacturing

The tower ride can consists of 120 ft. to 300 ft. tall towers with a surrounding passenger cart of 16 to 32 seats. The passenger cart is launched vertically either up, down, or both creating both positive and negative g-force loads (gravitational accelerations). The tower provides a controlled and guided path for the passenger cart.

Download Product Brochure

What Sets the Interactive Rides Tower apart from the others?

Cost

• Lowest cost per capacity / height tower ride
• Lower construction cost due to the single small diameter tower resulting in savings on foundations and erection time...literally saving a park 100's of thousands of dollars.
• We can place 32 seats on a single tower

Interactivity

• Our interactive high capacity seating design allows the guest to interact with his / her friends or family during the ride. Kids will have as much fun telling the story of how scared Mom or Dad looked during the ride as they did riding the ride.
• Optional on-board photo system where the patrons can take pictures of themselves or the ones facing them by pressing on a switch located in their restraint lap pad.

Artistic towers are decorative sculptures

• Interactive Rides' towers have a new artistic yet high-tech look and appeal unlike any other tower ride.

Visual operator interface

• The control system logs performance data from the previous ride cycle so that maintenance personnel can look at performance data and properly diagnose ride performance.
• Dual processer control for increased safety. Graphical interface is easy for operators and maintenance personnel to understand.

Round enclosed tower design is safer for maintenance personnel

• If items, bolts, valves, fittings, etc. are dropped, they will be contained within the tower posing no danger to personnel outside the tower.

Highest Possible Safety Systems

• All critical valves / safety systems are redundant - no single point failure can result in adverse ride conditions.
• Dual ride control processors for complete redundancy.
• A redundant weight system makes the ride experience more consistent and safe.
• All cables are designed to meet the strictest codes throughout the world.
• All cables are pre-tensioned for longer life and better wear.
• The ride complies with ASTM F-24, or DIN 4112.
• Independant hydraulic emergency brakes.
• Custom paint, themeing, height and ride options are available.